Polyspun Sediment cartridges offer a simple means of filtration.
They are made from spun bonded polypropylene, the manufacturing technique of these cartridges results in no centre core to the filter, thus not restricting the filter performance. The materials also provide a resilient barrier to bacterial/chemical influence – preventing any build of unwanted waste (e.g. algae).
These sediment filters are compatible with most liquids and are highly effective for sediment, rust, sand, silt, and algae removal.
Replacement of this cartridge is recommended approximately every 6-12 months, dependent on usage and the water quality.
This standard size cartridge is compatible within standard 10” housings/filter systems.
The micron rating of a filter cartridge determines the ability of the filter’s media to remove contaminants by the size of particles it is exposed to. For example, a filter that is marked or rated “10 micron” has some capability to capture particles as small as 10 micrometers. Although, the micron rating does not determine the exact efficiency of contaminant holding capability of the filter, it will help you determine which filter is most suitable according to your water supply.
|Micron ratings||0.5 abs, 1 abs, 1, 5, 10, 20, 50, 75|
|Size||2.5” x 10” (standard)|
We also supply this cartridge in Big White/Big Blue sizing for whole house/high flow applications.
|Small Whole House
|1, 5, 10, 20, 50||4.5” x 10”|
|Large Whole House
|1, 5, 10, 20, 50||4.5” x 20”|