A1SD5C Mains connected POU water dispenser with 12 litre cold water storage tank. Buy from Aqua One Australia / Better Water in Brisbane

Bench Top Plumbed In Water Cooler

You’ll never run out of filtered water again. This benchtop water cooler comes with 2 x taps and cool & cold or hot & cold options.

Description

You’ll never run out of filtered water again. This unit will give you an unlimited supply of filtered water and comes with two taps, giving you the choice of cool & cold or hot & cold and can be installed almost anywhere you want it.

Cool & Cold, Hot & Cold and Bench top systems available.
Has a large 12 litre antibacterial polypropylene reservoir, which is air tight and able to be removed for sanitation – 3.1 litres per hour Hot & Cold Systems available. Has a large 12 litre antibacterial polypropylene reservoir, which is air tight and able to be removed for sanitation – 45 cups per hour.

ADD A FILTER

Premium Twin Filter System

Aqua One Australia is a premium system using one-micron pre filtration and sub micron carbon filtration.
The AC400 series is manufactured in the USA and will remove chlorine, chloroform, ammonia, pesticides, herbicides, lead, copper and other heavy metals this premium filter will also remove parasites like Cryptosporidium and Giardia Sydney’s drinking water problem.

Standard Twin Filter System

Omnipure Twin filter with easy quick fit connections will remove dirt, sediment, rust, chlorine, chloroform, ammonia giving pure clean healthy, drinking water.
Rental – Auto Clean Cold Package Premium
Self Filling Automatic Cool & Cold Water Cooler, Premium Twin Filter System, All legally required plumbing parts including Pressure Limiting Valve, Brass Tee Piece, Isolation Valve, Cup Holder and complimentary cups.
Rental (Delivery and Standard Installation included)

Optional Extra’s

Plumbing Parts required (P L Valve, Brass T Piece, Isolation Valve)
Cup Holder for Standard Cooler
Paper Cups (Box of 1,000)

Maintenance Option

This includes a full inspection of all equipment by a licensed plumber, sanitation and sterilisation using non-toxic cleaners and a complete flush of all reservoirs every six months. Both cartridges on each unit will be changed at this time.Our computerised system ensures that your scheduled maintenance is done on time every time offering you peace of mind and no hassles, as well we keep signed and dated copies of maintenance should you ever need them.

Specifications

CABINET:

Top and front panels are moulded of UV treated ABS and side panels are zinc coated steel sheets covered in electrostatically applied high polymer polyester resin.

COLOUR:

High gloss cloud white available as standard.

DRIP TRAY:

Concealed lift-out design of a high impact durable plastic. Removable for sanitation, it incorporates an anti-splash grid which diverts drain water into the drip tray.

TAPS:

High impact polypropylene lever type. Fast flow and easy to operate. They’re assembled directly onto the reservoir and are fully recessed for added protection. Taps are 177mm above the drain grid allowing ample room for filling kettles and other tall objects. Hot tap has safety influence.

TOP:

One piece heat resistant plastic. This rust-proof top provides a flat surface to hold small coffee servers and trays.

FUNCTION STATUS DISPLAY:

Waterworks unique design. This exclusive device illuminates a red green signal indicating the Power/Hot/Cold position of the dispenser.

COOLING RESERVIOR:

Constructed of polypropylene plastic, approximately 12 litres in capacity. The reservoir features large radius corners to facilitate cleaning. The integrated zoned waterway and baffle system prevents ice rings from restricting chilled water flow. Cold water capacity below the baffle is 4.2 litres. Water above the baffle stays at or about room temperature.

HOT TANK:

Type 304 stainless steel. 500 Watt sheathed heater installed in the tank ensures accurate temperature control. On/Off switch is easily accessible at side of cabinet. Tank capacity is 2 litres.

AIR FILTER:

Located on the float assembly for easy access. The air filter contains a replaceable filter disc with a one micron membrane media.

FLOAT ASSEMBLY:

One stage polyethylene float valve system incorporates a primary float valve which maintains the water level in the reservoir and shuts off when full. The system is designed to operate on an incoming water pressure range of 140-700kPa and a pressure limiting valve should be fitted in situations where the mains pressure may fluctuate to greater than 700kpa.

REFRIGERATION SYSTEM:

Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condenser is air cooled static type for silent running. No fan assembly is required. Compressor is hermetically sealed, permanently lubricated and protected against motor overload.

ELECTRICAL:

240 Volts 50Hz single phase. A 1.5 metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps.

POWER CONSUMPTION:

D5C : 0.25kwh/day & 7.5kwh/month D5CH : 1.6kwh/day 48 kwh/month

PERFORMANCE:

Tap 1 Outlet water 9DC approx Tap 2 Outlet water 18DC approx Hot Tap Outlet water 88DC approximately.

SHIPPING WEIGHT:

D5C: 20kg D5CH: 22kg

DIMENSIONS:

SD5C: 15kgs SD5CH: 17kg

D5C/D5CH: 310mmW x 310mmD x 1040mmH SD5C/SD5CH: 310mmW x 310mmD x 630mmH

WARRANTY:

The entire range of Waterworks D5 Series water coolers are covered by a 12 Month Comprehensive Warranty (copy available on request). The warranty provides comprehensive parts and labour coverage, for the period of 12 months from the date of original sale.