Standard carbon block filter cartridge

Description

Carbon filters employ a high grade carbon with industry-leading surface area allowing for the greatest efficiency of the carbon absorption. Higher surface area extends the life of the cartridge, maximising time between cartridge changes.

Our Carbon Block Filters are manufactured from the highest quality, FDA-compliant raw materials with cutting-edge methods resulting in premium performance in reliability, absorption and flow rates.

The filter consists of a sediment pre-filter screen to catch particulate matter in the water flow.

This filter cartridge is Tested and Certified by NSF International against NSF/ANSI Standard 42 for material requirements only.

Application

This standard size cartridge is compatible within standard 10” housings/filter systems. Pleated cartridges are particularly useful for low pressure applications such as domestic water supplies.

The micron rating of a filter cartridge determines the ability of the filter’s media to remove contaminants by the size of particles it is exposed to. For example, a filter that is marked or rated “10 micron” has some capability to capture particles as small as 10 micrometers. However, the micron rating does not determine the exact efficiency of contaminant holding capability of the filter.

In the case of Carbon filtration, specific media properties can be obtained so as that the filter will target particular contaminants in your water supply (e.g. heavy metals). For further assistance in choosing a cartridge to suit your needs please call our support team on 07 3395 7122.

Carbon filtering is a method of filtering that uses  activated carbon to remove contaminants and impurities, taste and odour using chemical adsorption.

Each granule of carbon provides a large surface area structure, allowing contaminants the greatest possible exposure to the active sites within the filter media. One pound (450 g) of activated carbon contains a surface area of approximately 100 acres (40 Hectares).

Activated carbon works via a process called adsorption, whereby pollutant molecules in the fluid to be treated are trapped inside the pore structure of the carbon . Carbon filtering is commonly used for water purification, in air purifiers and industrial gas processing. It is also used in a number of other applications, including respirator masks, the purification of sugarcane and in the recovery of precious metals, especially gold.

Active charcoal carbon filters are most effective at removing chlorine, sediment, volatile organic compounds (VOCs), taste and odour from water. They are not effective at removing minerals, salts, and dissolved inorganic compounds. Reverse Osmosis is the best filtration for dissolved compounds.

Typical particle sizes that can be removed by carbon filters range from 0.5 to 50 micrometres. However, the amount and quality of carbon is also very important factor. The particle size will be used as part of the filter description. The efficacy of a carbon filter is also based upon the flow rate regulation. When the water is allowed to flow through the filter at a slower rate, the contaminants are exposed to the filter media for a longer amount of time.

There are 2 predominant types of carbon filters used in the filtration industry: powdered block filters and granular activated filters. In general, carbon block filters are more effective at removing a larger number of contaminants, based upon the increased surface area of carbon. Many carbon filters also use secondary media such as silver to prevent bacteria growth within the filter. Alternatively, the activated carbon itself may be impregnated with silver to provide this bacteriostatic property.